timingbelts.co.inFree timing belt tools
Timing belt tools › Timing belt code decoder

Timing belt code decoder

Type the code from the back of the belt or a parts list. See the profile, pitch length, teeth and width.

As printed on the back of the belt or in a parts list. Try one:

What the code means

How timing belt codes are written

Metric rounded-tooth belts (HTD, GT, S-profile)

800-8M-30 is an 800 mm pitch length belt with 8 mm pitch, 30 mm wide. 800 ÷ 8 = 100 teeth. GT belts add GT to the pitch (800-8MGT-30); S-profile belts start with S (S8M-1200-30).

Metric trapezoidal belts (T and AT)

T10-1010-25 is a T10 belt, 1010 mm long, 25 mm wide, with 101 teeth. Some lists put the width first: 25 T10/1010 is the same belt.

Inch belts (MXL, XL, L, H, XH)

The first number is the pitch length in tenths of an inch, then the profile, then the width in hundredths of an inch. 225L100 is 22.5 in long, L pitch (0.375 in), 1.00 in wide: 22.5 ÷ 0.375 = 60 teeth. MXL belts are often listed by tooth count with a B in front: B124MXL has 124 teeth.

Width codeInchesmm
0121/83.2
0193/164.8
0251/46.4
0315/167.9
0373/89.5
0501/212.7
0753/419.1
100125.4
1501½38.1
200250.8
300376.2

What “pitch length” means

Belt lengths are measured on the pitch line, which runs through the tension cords inside the belt, not round the outside. That is why a tape round the back of a belt reads longer than its code. The pitch length is always the number of teeth times the pitch.